Rollforming Services Speededge Section is currently available for 90mm floor slabs, other sizes available on request.
Stock Lengths of 4m, addional lengths available on request.
Its easy to use brackets are posioned locking the channel in place then connected to the beams with shot fired nails or Tek screws.
Lengths are easily joined using our joiner plate to allow continuous connections around the perimeter of the structure.
The shallow bracket shape allows for easy fixng around other structural components.
Featuring a foldable top edge for different slab thicknesses and preformed holes for location and tying of rebar.
The easy to use corner details allow for a continuous perimeter to be established around complex shapes and any internal or external angle can be achieved.
Internal bends are achieved by cutting a V into the section using snips or a grinder. Then folding the Speededge channel to the desired angle.
External bends are achieved by cutting a slot into the section using snips or a grinder. Then folding the Speededge channel to the desired angle.